|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||wooden case|
|Delivery Time:||30 days or so|
|Item Name:||Factory Sales Custom Heavy Duty Cable Pulling Diesel Power Engine Driven Winch||Product Model:||JMD|
|Power Supply:||Disel||Winch Control:||Control Lever|
Diesel winch a self contained single drum, diesel powered winch.The drum is fitted with a foot controlled band brake and is powered by a diesel engine via a torque converter and gear train.
The winch speed is controlled through the engine throttle and two-speed forward and reversing gear lever.
|Rated Speed||Rope Capacity
|Motor Type||Motor Power
The winch transforms diesel energy into mechanical energy through the Gear, Through the brake and the reducer reduces speed to rotate the reel. The reel winds the wire rope and passes through pulley block to make the hook lift the load, and transforms mechanical energy into mechanical work finishing transportation, load and unload of heavy weights.
mining, metallurgical, lifting, construction, chemical, road and bridge, water and electricity installed the terminal, oil and other industries.It is suitable for the outdoor there isn't electric.
Xinxiang New Leader Machinery Manufacturing Co., Ltd is devoted to manufacture and sell lifting and handling equipment. Our products cover rail transfer car, steerable transfer car, trackless flat cart, bay to bay rail transfer cart, rail wheel, industrial winch, etc.
Our products have a wide application field including metallurgy industry, machinery manufacturing industry, steel mill, mine industry, power industry, mold industry, automobile assembly industry, shipyard industry etc.
Our products have been exported to more than 50 Countries and regions, such as USA, Canada, Mexico, Germany, Netherlands, Vietnam, Thailand, Philippines, Saudi Arabia, South Africa, etc.
After the winch is installed, it must be checked and adjusted.
1. Open gear transmission with 0.42 mm flank clearance, the contact area along the tooth height is not less than 40%, and the extension tooth length is not less than 50%.
2. Check whether each drive system of the working brake is flexible and reliable, and adjust the gap between the brake shoe and the brake wheel to be not more than 0.7-0.8mm when the brake is loosened.
3, check the safety brake each drive system is flexible and reliable, and adjust the loose brake when the gap between brake shoe and brake wheel is not greater than 1.5mm.
4. Check whether the control device of the service brake and the safety brake is interlocked with the main motor, that is, start the main motor working brake to release the brake, and stop the main motor to brake the service brake, and only the safety brake release the brake to start the main motor.
1. The reducer is lubricated with winter gear oil or saturated cylinder oil. The oil surface should ensure that the worm is completely immersed in the oil. The reducer uses oil once a year.
2. The bearing of the main shaft bearing and the output shaft of the reducer should be replaced or supplemented with the No. 4 calcium base grease regularly, and oil should be changed every two years.
3. Lubricate open gears before driving each time.
4. The remaining parts requiring lubrication should be lubricated before each drive. In particular, the thrust ring between the two gears on the output shaft of the reducer and the shaft sleeve of the movable gear should be filled with lubricating oil.
Winch test run
After the winch is installed, it can be lubricated and lubricated for lubrication points after being inspected and adjusted for confirmation. After the no-load test run, the load is run after being wound and gradually loaded to the rated load. Under the standard voltage, the current does not exceed the rated value, and the motor, reducer and other parts do not generate heat.