|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||The whole trab s will be packed by the tarp, the parts will be packed by polywood case.|
|Delivery Time:||30-40 days after receive your prepayment|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||600 sets/year|
|Product Name:||Factory Direct Motor Driven Electric Transfer Carriage For Paper Plant Workshop||Power Supply:||Low Voltage Rail Powered|
|Application:||Factory ,warehouse And Working Line||Warranty:||1 Year|
KPD series electric transfer carriage powered by the 36V single-phase (three phase) low voltage rail, which through sliding wire to complete. Ground step-down transformer control cabinet will be single phase (three phase) AC 380V step-down to single-phase (3Phase) 36V, sent to the flat car by the rail sliding wire, and then step-up (three phase) single-phase AC 380V by step-up transformers on the car, provide electricity for the single-phase capacitor motors which used in the car.
This series have strict requirement on the construction of the railways which need to be insulated. The rated load can not be more than 50T.
When running distance is more than 70m, you need to increase the transformers to make up the voltage which has been lowered.
|Rail Inner Gauge(mm)||1200||1435||1435||2000||2000|
|Max Wheel Load(KN)||14.4||77.7||174||343.8||265.2|
|Recommended Rail Model||P15||P24||P43||QU100||QU100|
|Power supply mode||Low voltage electricity from the railways|
|Operation system||Remote & hand held control|
|Feature||Factory material transfer
Running distance is unlimited
Can be used on "S"arc-shaped and cross railways
The electric transfer carriage is mainly applied in assembly line(ring production line, loop production line), metallurgy industry (steel ladle), warehouse transport, ship industry (maintenance, assemble, container transport), workpiece transport in workshop, lathe transport, steel factory(steel billet, steel plate, steel coil, steel pipe, section steel, steel structure), construction(bridge, simple building, concrete, concrete column), petroleum industry(oil pump, sucker rod and parts), energy(polycrystalline silicon, generator, windmill), chemical industry(electrolytic cell, retort etc), railway(rail maintenance, rail welding, train tractor).
Our commitment: The load bearing safety factor of the carriage is no less than 120%.
Freely design the auxiliary device or foundation drawing, and offer the technical service and drawing material.
16 hours engineering service and 24 hours internet service for our customers.
During the warranty period, if our products can't work normally, we can support you repair technology or replace relevant parts for you within 24 hours.
Solving the quality problem within 24 hours, serious attitude from beginning to end. Value the reputation and Preserve the image of our company.